CPLD ?


В этой теме 2 ответа, 3 участника, последнее обновление  Golubev Dmitry 8 года/лет, 1 месяц назад.

  • Автор
    Сообщения
  • #5079

    Sever
    Участник

    Нужно поставить новую версию CPLD на xServer.

    Есть образ дискеты в виде *.img файла, по инструкции эта дискета подается серверу через USB Floppy Drive.
    Собственно есть пара вопросов:
    1.каким образом и каким софтом этот img файл заливается на дискету?
    2.есть ли возможность использовать другой носитель (к примеру флешку)? Если да, то каким тогда образом преобразовать этот «img» файл? Ну нету у меня USB Floppy Drive 😉

    PS… Дока по установке CPLD прилагается…

    CPLD Update Utility for IBM eServer xSeries
    Systems 8863, 8864, 8865, 8866, 8872, 8874, 8878, 8879, 7362, 7363, 7364, 7365, 7366, 7367
    Version 1.12, Build ID: HEUD23C, Revision 12 (IO=19/13x, PCI=30/1Dx, CPU=15/0Ex)

    (C) Copyright International Business Machines Corporation 1999, 2005. All rights reserved.
    US Government Users Restricted Rights — Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

    Note: Before using this information and the product it supports, read the general information in «Notices and trademarks” in this document.

    1.0 Overview
    ——————

    1.1 Overview about this code

    This utility will update the CPLD code on this system.

    1.2 Limitations

    — If the BMC code is corrupted or disabled, this utility may not operate correctly.

    — If power is removed from the system while it is programming the CPLD code, you may not be able to recover your system
    to its original state.

    1.3 Problem(s) Fixed: 1. System reset when fan speed goes from low to max only when one power
    supply is in position 1
    2. Intermitent system reset when power supply in position 2 is removed.
    3. Intermitent system reset when BMC is being updated and only one power supply in
    position 1. The system resets BEFORE BMC loads.
    4. Machine Check PCI-X split completion timeout per RETAIN Tip H191900.

    1.4 Level of Recommendations and Prerequisites for the

    Update: NonCritical update. Schedule during normal maintenance schedule.

    — BMC firmware should be updated to the latest level.
    1. Upgrade to HEUD23C requires update to BIOS 165B or higher for x260 (8865), x3800 (8865), x366 (8863), x3850 (8863),
    x460(8872, 8874), and x3950 (8872, 8874).
    OR
    2. Upgrade to HEUD23C requires update to BIOS 121A or higher for x3800 (8866), x3850 (8864), and x3950 (8878, 8879).

    1.5 Dependencies:

    — Refer to note in 1.4, above.
    — After the update, the system operator must AC cycle power to the system.
    — Refer to TIP H1988. For multinode systems, each node must be individually updated in standalone mode.
    — For multinode systems, the .IMG file MUST be used. The others cannot work because they require the operating system to be active.

    2.0 Installation and setup instructions
    ——————————————

    2.1

    1. Insert Disk into USB Floppy Drive

    2. Follow instructions closely on screen.

    3. Remove AC power for 20 seconds before re-applying.(Update will not take effect unless AC power is cycled)

    3.0 Configuration information
    ——————————-

    — Make sure BMC is flashed to the latest level and enabled.

    — If a FRU has been replaced, the current CPLD level may be shown as «UNKNOWN».
    If you see this, please continue with the update.

    — If you have a multinode system, you will need to load the .IMG file on each individual node.
    Refer to http://www.ibm.com/xxxxxxxxxxxx

    4.0 Unattended mode
    ———————
    This update does not support unattended installation.

    5.0 Web information and support phone numbers
    ———————————————

    You can download new and updated files for IBM products from http://www.ibm.com/support/.

    For a list of supported operating systems on legacy (non-shipping)
    controllers, see http://www.ibm.com/servers/eserver/serverproven/compat/us/.

    You can receive hardware service through IBM Services or through your IBM
    reseller, if your reseller is authorized by IBM to provide warranty service. See
    http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S.
    and Canada, call 1-800-IBM-SERV (1-800-426-7378).

    In the U.S. and Canada, hardware service and support is available 24 hours a day,
    7 days a week. In the U.K., these services are available Monday through Friday,
    from 9 a.m. to 6 p.m.

    6.0 Notices and trademarks
    —————————
    The following are examples and this list should be modified to reflect the specific update you are providing. See http://www.ibm.com/legal/copytrade.shtml
    for a list of IBM trademarks.

    The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both:

    Active PCI OS/2 WARP
    IBM Predictive Failure Analysis
    Netfinity ServeRAID
    Netfinity Manager ServerGuide
    OS/2

    UNIX is a registered of The Open Group in the United States and other countries.

    Microsoft, Windows, and Windows NT are of Microsoft Corporation in the United States, other countries, or both.

    Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

    Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.

    Adaptec and HostRAID are trademarks of Adaptec, Inc.

    Other company, product, or service names may be trademarks
    or service marks of others.

    7.0 Disclaimer
    —————
    THIS DOCUMENT IS PROVIDED «AS IS» WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
    THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS
    DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

  • #5088

    Michael
    Участник

    Мож я чего-то не так понял, но на сайте ИБМ-ов рядом с этим имиджем лежит утилитка для работы с CLPD из-под винды…
    А .img можно попробовать вскрыть, например, виндовой программкой UltraISO.

  • #5593

    Golubev Dmitry
    Участник

    А еще зачем IBM всякие BMC и RSA в свои сервера ставит, можно просто образ подцепить с удаленного компа, главное чтобы сеть была.

Для ответа в этой теме необходимо авторизоваться.