Re: HMC + LPAR – проблема с tty0

Главная Форумы POWER Systems AIX/Hardware HMC + LPAR – проблема с tty0 Re: HMC + LPAR – проблема с tty0

#16725
DanGer
Участник

[spoiler][code]hscroot@localhost:~> lssysconn -r all
resource_type=sys,type_model_serial_num=9117-570*NODE2,sp=primary,sp_phys_loc=U7879.001.DQD435G-P1-C8,ipaddr=10.159.20.111,alt_ipaddr=unavailable,state=Connected
resource_type=sys,type_model_serial_num=9117-570*NODE2,sp=unavailable,sp_phys_loc=unavailable,ipaddr=192.168.2.201,alt_ipaddr=unavailable,state=Connecting,connection_error_code=Connecting 0000-0000-00000000
resource_type=sys,type_model_serial_num=9117-570*NODE1,sp=primary,sp_phys_loc=U7879.001.DQD446Z-P1-C8,ipaddr=10.159.20.112,alt_ipaddr=unavailable,state=Connected
resource_type=sys,type_model_serial_num=9133-55A*TEST,sp=primary,sp_phys_loc=unavailable,ipaddr=10.159.20.113,alt_ipaddr=unavailable,state=Connected

hscroot@localhost:~> lshmc -n
hostname=localhost,domain=localdomain,”ipaddr=10.159.20.101,10.1.255.1″,”networkmask=255.255.255.0,255.255.255.0″,gateway=10.159.20.1,nameserver=,domainsuffix=,slipipaddr=10.253.0.1,slipnetmask=255.255.0.0,ipaddrlpar=10.159.20.101,networkmasklpar=255.255.255.0,clients=,ipv6addrlpar=fe80:0:0:0:21a:64ff:fe95:5600,ipv4addr_eth0=10.159.20.101,ipv4netmask_eth0=255.255.255.0,ipv4dhcp_eth0=off,ipv6addr_eth0=fe80:0:0:0:21a:64ff:fe95:5600/64,ipv6auto_eth0=off,ipv6privacy_eth0=off,ipv6dhcp_eth0=off,lparcomm_eth0=on,speed_eth0=auto,duplex_eth0=auto,ipv4addr_eth1=10.1.255.1,ipv4netmask_eth1=255.255.255.0,ipv4dhcp_eth1=off,ipv6addr_eth1=,ipv6auto_eth1=off,ipv6privacy_eth1=off,ipv6dhcp_eth1=off,lparcomm_eth1=off,speed_eth1=auto,duplex_eth1=auto[/code][/spoiler]

Со второго HMC точно такой же вывод, окромя строки с адресом 192.168.2.201. И адрес второго HMC заканчивается на 201.